Instructions for running TechNote1 example under Questa
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

1. Run Questa in THIS DIRECTORY.

2. Before starting, ensure that the correct OVM library is set up.
   You can do this by executing the "lib_setup.do" script from
   within Questa.  Start Questa in command-line mode (vsim -c)
   and then "do lib_setup.do".

3. To run the simulation, use the response file TechNote1.f:
      qverilog -f TechNote1.f
   Add the -gui option to qverilog if you want to use Questa's
   GUI and waveform viewer.
   
